RReeccoommmmeennddeedd sseeppaarraattiioonn ddiissttaanncceess bbeettwweeeenn ppoorrttaabbllee aanndd mmoobbiillee RRFF ccoommmmuunniiccaattiioonn eeqquuiippmmeenntt aanndd tthhee 33000099
PPrrooCCuuiittyy bbeedd sseerriieess
The 3009 PPrrooCCuuiittyy bed series is intended for use in an electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of the 3009 PPrrooCCuuiittyy bed series can help prevent electromagnetic interferences
by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the
3009 PPrrooCCuuiittyy bed series, including cables, as recommended below, according to the maximum output power of the
communications equipment.
BBaanndd ((MMHHzz))
SSeerrvviiccee
MMaaxxiimmuumm ppoowweerr
((WW))
MMiinniimmuumm sseeppaarraattiioonn ddiissttaannccee
((mm))
380-390 TETRA 400 1.8 0.3
430-470
GMRS 460;
FRS 460
2.0 0.3
704-787
LTE Band 13, 17
0.2 0.3
800-960
GSM 800/900;
TETRA 800;
iDEN 820;
CDMA 850;
LTE Band 5
2.0 0.3
1,700-1,990
GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3, 4, 25;
UMTS
2.0 0.3
2,400-2,570
Bluetooth;
WLAN;
802.11 b/g/n;
RFID 2450;
LTE Band 7
2.0 0.3
5,100-5,800
WLAN 802.11 a/n 0.2 0.3
For transmitters rated at a maximum output power not listed above, the recommended separation distance
d
in meters
(m) can be estimated using the equation applicable to the frequency of the transmitter, where
P
is the maximum output
power rating of the transmitter in watts (W) according to the transmitter manufacturer.
NNoottee -- These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and
reflection from structures, objects and people.
3009-009-001 Rev B.0 51 EN
To Next Page
Loading...
