Studer 928 - Page 47

928 Mixing Console
E 3/4 Jumpers
Edition:
07.02.01
Input channel meters The built-in LED meter can be operated with VU or PPM characteristic
and indicate either the input signal, the post-fader signal or the signal
on the direct output or N-1 output.
J7
1-2 (default)
PPM characteristic
2-3
VU characteristic
J8/J10
1-1 (default)
Meter before equalizer
2-2
Meter on direct (N-1) output signal
3-3
Meter after fader
Direct output The signal for the direct output can optionally be tapped before or after
the fader.
J14
1-2 (default)
Direct output post-fader
2-3
Direct output pre-fader
J9
1-2
For talkback on the Dir/N-1 output, the normal
output signal is interrupted (TB signal exclusive)
2-3 (default)
The talkback signal is mixed down with the
Dir/N-1 signal