20
Press an effect module button to insert it prior to the busses EQ. Each effect module can
only be inserted in one place and while the input channels allow for only one effect module
to be inserted, all busses allow for two effect modules inserted subsequently with the order
of the modules being determined by the order of selection. When a selected module is used
in another channel or bus, a pop-up window will warn: “The module can only be used once
and it is already used by xxx. Are you sure you want to use the module forcibly now? Yes /
No”. Change the effect settings through: SETUP→FX→click on a module to open a dialog
for the effect.
To Next Page
Loading...
