36
or on the touch screen (fine tuning can be activated by pressing the main encoder knob).
Double press the parameter frame to set it as default.
Freq：ranges from 1.5 KHz to 15 KHz, with a default @ 6.3 KHz. Adjust the Frequency by
turning the main encoder or on the touch screen (fine tuning can be activated by pressing
the main encoder knob). Double press the parameter frame to set it as default.
⑥ Other parameters
Factor：ranges from 0 to 13, with a default @ 1. Adjust the Factor by dragging the slider, or
turning the main encoder on the control panel. (fine tuning can be activated by pressing the
main encoder knob).
Temp o：ranges from 40 to 240 BPM, with a default @ 80. Adjust the Tempo by turning the
main encoder (fine tuning can be activated by pressing the main encoder knob).
Tap Tempo: Keep pressing this button to set BPM value, press at least three times to set.
Delay Time: ranges from 0 to 2000 ms, with a default @ 750ms. Adjust the time parameter
by turning the main encoder or on the touch screen (fine tuning can be activated by
pressing the main encoder knob). Double press the parameter frame to set it as default.
Delay Time can be configured by Factor and Tempo (see Chart 1 for the relation). Factor
corresponds to regular tuning, while Tempo corresponds to fine tuning. For example, set
Factor to 8, Tempo to 120 BPM, Delay Time is 500 ms（60*1000/120=500）. if set Factor to
9, Delay Time will be 1000 ms. if Factor to 7, Delay Time will be 250 ms.
Chart 1
Feedback: to return output delay into input, so as to generate echo from amplitude
attenuation. Ranges from 0 to 90, with a default @ 0. To adjust by turning the main encoder
or dragging slider on the touch screen (fine tuning can be activated by pressing the main
encoder knob).
Facto
To Next Page
Loading...
