Stulz BNB Series - Page 59

© STULZ GmbH, Hamburg EN / 10-2015 / 1000683
-
59
-
STULZUltraSonic-SystemforDirectRoomHumidicationBNB-  Start-up
Adjusting the blow-out angle:
6
Adjust mist outlets by rotating the Mist guide
tubes.
Adjusting the blow-out width and height:
Completing start-up:
7
In the event of condensation or larger droplets
in the mist, the blow-out can be adjusted using
the setting screw on the side of the unit. On
delivery the setting is "Maximum".
8
Fill out the Start-up Report.
Setting
screw
Mist guide tube
CAUTION
Need for settings.
Normally, no settings must be undertaken here.
Note