6.8.4 Signals
PID-6931-INPUTSIGNALS v1
Table 86: STBPTOC Input signals
Name
Type Default Description
I3P GROUP
SIGNAL
- Three phase currents
BLOCK BOOLEAN 0 Block of function
BLKTR BOOLEAN 0 Block of trip
RELEASE BOOLEAN 0 Release of stub protection
PID-6931-OUTPUTSIGNALS v1
Table 87: STBPTOC Output signals
Name Type Description
TRIP BOOLEAN General trip
START BOOLEAN General start
6.8.5 Settings
PID-6931-SETTINGS v1
Table 88: STBPTOC Group settings (basic)
Name
Values (Range) Unit Step Default Description
Operation Off
On
- - Off Operation Off / On
ReleaseMode Release
Continuous
- - Release Release of stub protection
I> 5 - 2500 %IB 1 200 Operate current level in % of IBase
Table 89: STBPTOC Group settings (advanced)
Name
Values (Range) Unit Step Default Description
tDelay 0.000 - 60.000 s 0.001 0.000 Time delay
Table 90: STBPTOC Non group settings (basic)
Name
Values (Range) Unit Step Default Description
GlobalBaseSel 1 - 12 - 1 1 Selection of one of the Global Base
Value groups
Section 6 1MRK 505 384-UEN A
Current protection
156 Breaker protection REQ650 2.2 IEC
Technical manual
To Next Page
Loading...
