CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018 11 of 112 DLM 97200-03 EN Rev. A
Any operation requiring access to the inside of the Sensor, including
installation of maintenance items, could result in injury. To avoid potentially
dangerous shock or burn, turn off power and, if possible, disconnect from the
power supply before opening the Sensor.
The UV lamp contains mercury and may be considered hazardous material in
your local area. Dispose of it in accordance with federal, state, or local
government regulations.
To protect against accidental exposure to ultra-violet radiation, do not operate
the UV lamp outside of its protective housing.
Before replacing the UV lamp, remove the battery from the Sensor and disable
the external circuit breaker.
This is a Safety Class I product. It must be must be attached to a grounded
power source.
If this instrument is used in a manner not specified by SUEZ, the protection
provided by the instrument may be impaired.
To Next Page
Loading...