CheckPoint Pharma and CheckPoint
e
Operation and Maintenance Manual
SUEZ © 2018 12 of 112 DLM 97200-03 EN Rev. A
Always stop analysis and power off the Sensor before unplugging the power
cord or removing the battery.
This is a Class A product. In a domestic environment, this product may cause
electromagnetic interference in which case the user may be required to take
adequate measures to correct the interference.
Equipment adjacent to the Sensor may be subject to electromagnetic
interference (EMI).
To ensure proper Sensor performance, only operate the Sensor in an
environment that complies with the Sensor’s environmental specifications.
The calibration kit contains a sharp needle. Do not put fingers or inappropriate
materials near the needle.
Install an external circuit breaker and overcurrent protection if you use power
conduit.
To Next Page
Loading...