SummaCut cutter User’s Manual
Basic Operation 2-7
5. Use or to scroll through the menu until ‘Velocity’ is reached, press .
‘Velocity’ will appear on the LCD.
6. Press
or to choose the velocity parameter that needs to be changed.
The menu can scroll between ‘UP’, ‘UP ACC’, ‘ACC’ and current velocity setting.
7. Press
or to change the value of the chosen parameter.
The value will change on the LCD.
8. Press
to confirm.
An asterisk will appear before the value, indicating it is now the selected setting.
9. Press
twice to leave the menu.
NOTE: Velocity is the main speed parameter. The default value for the three other
parameters is AUTO. This means that they are linked to velocity (which is the speed
when the tool is down). These parameters can be set individually, but will then lose
the link with the velocity parameter.
To Next Page
Loading...
