C-4 Netra Internet Server 3.1 User’s Manual—September 1996
C
c. Confirm that the entered information is correct:
The following is displayed:
• If you typed 2 for a Novell (SPX/IPX) network:
a. Enter the IPX network number:
See Chapter 12, “Local Area Network Administration” for more
information on SPX/IPX network numbers and frame types.
b. Enter the number for the frame type you are using:
The following configuration information has been entered:
Interface: your interface
IP Address: your host address
IP Netmask: 255.255.255.0
Select from the following options:
1) Configure le0 with these values.
2) Discard these values and input new values.
3) Discard these values and exit.
Enter an option [1]:
Lance Ethernet Port 0 has been configured for TCP/IP operation.
IP address: your host address
Netmask: 255.255.255.0
Enter the IPX network number in hexadecimal format:
The following frame types are available:
1) Ethernet_802.2
2) Ethernet_802.3
3) Ethernet_II
4) Ethernet_snap
Enter the number corresponding to the frame type being used [1]:
To Next Page
Loading...
