20 Sun Fire 280R Server Service Manual • January 2001
3. Tighten the four captive screws securing the system to the left and right vertical
rails at the front of the rack.
Use a Phillips No. 2 screwdriver to tighten the four captive screws, which are in
recessed access holes in the decorative panels affixed to the system’s front panel.
4. Connect all external cables that were attached to the back panel of the system.
Examine each disconnected cable for information indicating the cable’s origin and its
terminating connection.
5. Replace, close, and lock the rack enclosure doors, as appropriate.
To Next Page
Loading...
