26 Sun Fire 280R Server Service Manual • January 2001
2. Position one person on each side of the system, facing the inner glides on the
system chassis.
When you are both in position, verify that your helper understands what to do with
the system after you lift it. Also agree on a route to follow to the rack enclosure, and
visually inspect the route for potential safety hazards (for example, cables on the
floor, other people working in the vicinity, and so on).
3. Lift the system.
Each person should place both hands beneath the chassis and support half the
weight of the system.
4. Carry the system to the front of the rack enclosure.
To Next Page
