x Sun Fire T1000 Server Installation Guide • January 2006
▼ To Install the Mounting Brackets 12
▼ To Install the Slide Rails 15
▼ To Install the Server in the Rack 19
▼ To Install the Cable Management Bracket 20
Removing the Server From the Rack for Service 20
Connecting the Server Cables 20
▼ To Connect the SC Serial Management Port 21
▼ To Connect the SC Network Management Port 22
▼ To Connect the Ethernet Network Cables 22
Serial Port 22
▼ To Connect the AC Power Cables to the Server 22
3. Powering On the System 25
Powering On the System for the First Time 25
▼ To Power On the System for the First Time 25
Logging In To the System Controller 27
▼ To Log Into the System Controller Using the Serial Management Port 27
▼ To Configure the System Controller Network Management Port 28
▼ To Reset the System Controller 31
▼ To Log In To the System Controller Using the Network Management
Port 32
Using the System Controller for Common Operations 33
▼ To Initiate the Power On Sequence 33
▼ To Connect to the System Console 33
Example of a Normal System Initialization 34
Booting the Solaris Operating System 35
▼ To Boot the Solaris Operating System 36
▼ (Optional) To Reset the System 37
▼ To Power Cycle the System 37
To Next Page
