11
CHAPTER
2
Installing the Sun Fire T1000 Server
This chapter provides instructions for installing the Sun Fire T1000 server in an open
rack or closed cabinet. This chapter contains the following sections:
■ “Rackmount Kit” on page 11
■ “Installing the Server in a Rack” on page 12
■ “Removing the Server From the Rack for Service” on page 20
■ “Connecting the Server Cables” on page 20
Note – Ensure that you have all of the parts before you begin the installation of the
server. See “Shipping Kit Inventory List” on page 2
Note – In this guide, references to left and right are from your viewpoint as you face
either the front or the back of the system.
Rackmount Kit
The Sun Fire T1000 server rackmount kit includes two mounting slides, a slide
spacing tool, and a cable management bracket. The kit also includes two extension
brackets for use with racks up to 39.5 in (1000 mm) in depth.
The mounting kit also includes an assortment of screws and nuts to fit various types
of racks. Extra screws and nuts are included.
To Next Page
