Sun Microsystems Sun Fire T1000 - Page 50

30 Sun Fire T1000 Server Installation Guide • January 2006
netsc_tpelinktest true
netsc_dhcp false
netsc_ipaddr xxx.xxx.xx.xx
netsc_ipnetmask 255.255.255.0
netsc_ipgateway xxx.xxx.xx.xx
mgt_mailhost xxx.xxx.xx.xx
mgt_mailalert(1) username
sc_customerinfo userinfo
sc_escapechars #.
sc_powerondelay false
sc_powerstatememory true
sc_clipasswdecho true
sc_cliprompt sc
sc_clitimeout 0
sc_clieventlevel 3
sc_backupuserdata true
diag_trigger power-on-reset
diag_verbosity max
diag_level min
diag_mode normal
sys_autorunonerror false
sys_confighost hostname
sys_configip xxx.xxx.xx.xx
ser_baudrate 9600
ser_parity none
ser_stopbits 1
ser_data 8
netsc_enetaddr xx:xx:xx:xx:xx:xx
sys_enetaddr xx:xx:xx:xx:xx:xx
TABLE 3-1 Typical System Controller Parameter Settings (Continued)
Parameter Value