iv Sun Fire V890 Server Rackmounting Guide • May 2004
Adjust the Rear Brackets 19
Determine the Vertical Position of the Server in the Cabinet 20
Attach the Tray Assembly to the Cabinet 21
Installing the Server Into the Tray Assembly 23
Restoring the Server 28
Securing the Server in the Cabinet 28
Installing Trim Strips 30
Restoring the Cabinet 30
Managing Cables 31
Attach the Cable Management Bracket to the Cabinet 32
What Next 33
3. Installing the Server Into the Sun Rack 900 Cabinet 35
Before You Begin 36
Safety and System Performance Cautions 36
Tools, Equipment, and Documentation Required 37
Preparing the Server 38
Remove Components 38
Overview of Parts to Be Removed From the Chassis 39
Remove the Handle From Each Side Door 40
Remove the Fenders and Lower Side Panels 42
Install the Lifting Handles 45
Preparing the Cabinet 46
Installing the Tray Assembly Into the Cabinet 46
Adjust the Rear Brackets 46
Determine the Vertical Position of the Server in the Cabinet 48
Attach the Tray Assembly to the Cabinet 49
Installing the Server Into the Tray Assembly 52
Restoring the Server 57
To Next Page
Loading...
Need help?
General
