35
CHAPTER
3
Installing the Server Into the Sun
Rack 900 Cabinet
This chapter provides step-by-step instructions for installing the Sun Fire V890
server into the Sun Rack 900 cabinet.
To install a Sun Fire V890 server into the cabinet, complete the following tasks in the
order listed:
■ Make sure you have completed the prerequisite tasks. See “Before You Begin” on
page 36.
■ Prepare the server. See “Preparing the Server” on page 38.
■ Prepare the cabinet. See “Preparing the Cabinet” on page 46.
■ Install the tray assembly into the cabinet. See “Installing the Tray Assembly Into
the Cabinet” on page 46.
■ Install the server into the tray assembly. See “Installing the Server Into the Tray
Assembly” on page 52.
■ Make the server ready for operation. See “Restoring the Server” on page 57.
■ Secure the tray handle to the cabinet rails. See “Securing the Server in the
Cabinet” on page 58.
■ Replace the front and back doors of the cabinet. See “Restoring the Cabinet” on
page 59.
To Next Page
Loading...
