Sun Microsystems Sun Fire V890 Rack Mounting Guide

Chapter 3 Installing the Server Into the Sun Rack 900 Cabinet 43
2. Remove the lower side panel from the left side of the server.
Remove the screw located approximately 3 inches (8 cm) from the front of the lower
side panel.
Note – On the left side of the server, do not remove the screw that attaches the small
bracket to the side of the server. Removing this screw prevents the front door from
closing securely.
Do not remove this screw.

Sun Microsystems Sun Fire V890 Specifications

General

Brand	Sun Microsystems
Model	Sun Fire V890
Category	Server
Language	English