Chapter 4 Installing the Server Into a 31.5-Inch Cabinet 81
Installing the Server Into the Tray
Assembly
1. Be sure the cabinet is stabilized so that the cabinet cannot move or tip forward
when the tray is extended and the server is placed on the tray.
If there are feet beneath the cabinet to prevent it from rolling, be sure the feet are
fully extended downward to the floor.
Stabilize the cabinet using the stabilizing mechanisms provided with the cabinet.
See the instructions provided with the cabinet.
Caution – Before you slide the tray out, be sure the cabinet is stabilized so that it
cannot move or tip forward. See the cabinet documentation for information about
stabilizing the cabinet.
!
Some cabinets may be equipped with
stabilizers or bolt-down mechanisms.
See the cabinet documentation for
stabilizing instructions.
Stabilizers
To Next Page
Loading...
