User Manual 8 Web Interface
37
Inverter realtime values
Information on the inverter such as state, daily yield, active power, and reactive can
be viewed.
8.6.2 Current Alarms
Click "Overview" -> "Current alarms" to view the device fault information.
Information such as device name, alarm name, alarm type, alarm time, fault code,
and fault ID can be viewed.
8.7 Device Monitoring
Click "Device Monitoring" to enter the corresponding interface.
Device information such as real-time values, DC data, initial parameter, protection
parameter, general parameter, device instruction and device information can be
viewed on this interface.
8.7.1 RealTime Values
Realtime information such as power generation, device state, and active power can
be viewed on this interface.
Step 1 Click "Device Monitoring" -> "Realtime values" to view the corresponding
information.
Step 2 Click the button “ ” to select the device type.
8.7.2 DC Data
Click "Device Monitoring" -> "DC data" to view the corresponding information.
On this interface, voltage and current information of multiple inputs of MPPTs and
strings can be viewed.
8.7.3 Initial Parameter
Click "Device monitoring" -> "Initial parameter" to enter the corresponding interface
and set initial parameters.
Initial parameters can be set in two manners: single setting and batch setting.
Single setting
Step 1 Select the desired country (region) and grid type.
To Next Page
Loading...
