32
8 Web Interface
8.1 Running Requirements
IE11 or later, Chrome65 or later, and Safari11 or later
8.2 Login Steps
The Web interfaces provided in this document are for reference only,
and the actual ones may differ.
Users of different types have different permissions. In the following,
description is given by using the O&M permission as an example.
Users can log into the Logger1000 via the Ethernet or WiFi (recommended).
8.2.1 WiFi Login
Step 1 Open the wireless network settings of the PC, search for the wireless network
"SG-A1234567890" of the Logger1000, and connect the PC to the wireless
network of the Logger1000 (without password).
"SG-A1234567890" is just used as an example. For actual wireless
network, refer to the S/N on the label attached to the front side of the
Logger1000.
Step 2 Enter the IP address 11.11.11.1 of the Logger1000 in the PC address bar to
enter the general user login interface.
Step 3 Click the button "Login" in the upper right corner, enter the default password
"pw1111", and click "Login", to enter the O&M user interface.
User types include "general user" and "O&M user".
The general user can view basic information, real-time fault, and
device monitoring information of the Logger1000.
In addition to all permissions of the general user, the O&M user has
the permission to set and modify parameters of the Logger1000 and
To Next Page
Loading...
