Sungrow 1000A - 8.8 Device Maintenance

User Manual 8 Web Interface
39
Step 3 Select the desired devices in the pop-up device list, and click "Save" to
achieve batch setting.
Step 4 Click “Confirm” on the pop-up dialog box.
8.7.7 Device Information
Click "Device Monitoring" -> "Device Information" to view the corresponding
information.
Parameter information such as device S/N, device model, and rated active power
can be viewed.
8.8 Device Maintenance
8.8.1 Device List
The function module "Device list" is used for managing devices connected to the
Logger1000 and configuring addresses for these devices. Devices can be
automatically searched and added.
Auto search
The "Auto search" function is used for SUNGROW string inverter to which addresses
will be automatically allocated.
Step 1 Click "Device" -> "Device list" to enter the corresponding interface.
Step 2 Click the button "Auto search", and the corresponding window pops up.
Select an interface type, and click "Search".
Step 3 After that, corresponding devices will be displayed.
Inverters withou
t the SN do not support the automatic search function
and device adding function.
Automatic address allocation pops up only when there is an actual
address confrontation.
Export
Step 1 Click "Device" -> "Device list" to enter the corresponding interface.
Step 2 Click the button to export the device list.
Import
Step 1 Click "Device" -> "Device list" to enter the corresponding interface.