Sungrow 1000A - Inverter Log; History Data; System; Running Information

User Manual 8 Web Interface
41
Step 4 Complete firmware update to view current version, target version, start time,
end time and other information.
The firmware file should be in the ".sgu" format.
8.8.3 Inverter Log
Step 1 Click "Device" -> "Inverter log" to enter the corresponding interface.
Step 2 Select the device running information, and click the button to view the
export progress.
Step 3 Click "Save" to store the exported log in the local.
Step 4 Click "Cancel" and then "Confirm" on the pop-up window, to cancel the
current operation.
8.9 History Data
Click "History data" -> "Operation logbook" to enter the corresponding interface.
On this interface, users can view history information.
8.10 System
8.10.1 Running Information
Click "System" -> "Run-info" to enter the corresponding interface.
Information such as mobile network signal strength, WiFi, AI voltage, DI status can
be viewed.
8.10.2 System Maintenance
System upgrade
Users can upgrade Logger1000 on the Web interface.
Step 1 Click "System" -> "System maintenance" to enter the corresponding
interface.
Step 2 Click "System upgrade", select the upgrade file, and export it to the system.
Step 3 Click "Upgrade" on the pop-up version information window. The system
enters upgrade state.