User Manual 8 Web Interface
49
Mobile network
Perform Mobile network setting on this interface.
Step 1 Click "System" -> "Interface" -> "Mobile network" to enter the corresponding
interface.
Step 2 After modifying the APN, username and password, click to save the
information.
WiFi
Perform WiFi setting on this interface.
WiFi STA client
WiFi STA refers to a case in which the Logger1000 connect to another hotspot or
router via the WiFi function.
Step 1 Click "System" -> "Interface" -> "WiFi" to enter the corresponding interface.
Step 2 Users will enter the client mode by default, and the WiFi switch is closed.
WiFi hotspot
WiFi hotspot mode means that the Logger1000 is used as an hotspot, and the PC or
mobile phone can be connected to the Logger1000 via the WiFi function.
Step 1 Click "System" -> "Interface" -> "WiFi" to enter the corresponding interface.
Step 2 Click "Hotspot” to enter the corresponding interface.
Tab. 8-5 Description of hotspot parameter
Security
Null: without password
WPA2: hotspot encrypted, password required
Changing of the WiFi hotpot password requires reconnection of the
WiFi.
AI
Step 1 Click "System" -> "Interface" -> "AI" to enter the corresponding interface.
Step 2 Select an input type, set the lower limit and upper limit, and click the button
to save the operation.
To Next Page
Loading...
