Sungrow EMS300 - Overview; General Information

5
4 Overview
4.1 General Information
Click OOvveerrvviieeww→→GGeenneerraall IInnffoorrmmaattiioonn to enter the corresponding interface.
The figure is for reference only. The actual interface may be different and shall
prevail.
PPllaanntt OOvveerrvviieeww
• PV
Users can view parameters such as real-time active power, available active power,
theoretical active power and real-time reactive power of the PV.
• ES
Users can view parameters such as real-time active power, real-time reactive power,
maximum discharging power allowed, available reactive power, maximum charging
power allowed of the ES.
• Grid
Users can view parameters such as plant total active power, total reactive power of
plant, frequency, bus voltage, power factor, etc.
IInnvveerrtteerr OOppeerraattiinngg MMooddee
Users can view the current mode of operation of the system.
AAccttiivvee PPoowweerr CCoonnttrrooll
Users can view output curves for parameters such as plant active power, active power
target value, energy storage active power and grid frequency.