Sungrow EMS300 - Device Monitoring and Maintenance; Device Monitoring; Device Maintenance; Add Device

7
5
Device Monitoring and Maintenance
5.1 Device Monitoring
Click DDeevviiccee MMoonniittoorriinngg to enter the corresponding interface.
The figure is for reference only. The actual interface may be different and shall
prevail.
• Click
to select needed device type in the drop-down list.
• Select a device in the device list and view its real-time data on the right.
5.2 Device Maintenance
Click "DDeevviiccee→→DDeevviiccee lliisstt" to view the corresponding information.
The function module "DDeevviiccee lliisstt" is used for managing devices connected to the
system.
5.2.1 Add Device
step 1 Click DDeevviiccee→→DDeevviiccee lliisstt to enter the corresponding interface.
step 2 Click AAdddd ddeevviiccee, select a device type in the pop-up window, and fill in the information
required.
The figure is for reference only. The actual interface may be different and shall
prevail.