1
1
System Description
1.1 Introduction
EMS300 is a web-based local monitoring system. Addressing the problems of unused
surplus wind and PV power, unstable loads, and different electric prices between peak
and off-peak hours, it balances power supplies and demands economically and
efficiently under different application scenarios and operation modes by optimizing
energy storage control and distributed power output and coordinating the
commissioning and ceasing of loads.
1.2 Main Features
SSmmaarrtt aanndd fflleexxiibbllee
Hierarchical and graphical display, support of flexible configuration display
SSiimmppllee aanndd eeffffiicciieenntt
• Second-based real-time data refresh
• Real-time alarm display, accurate fault positioning, efficient troubleshooting
SSaaffee aanndd rreelliiaabbllee
• Strict control procedure, complying with power system safety standards.
• Support dual mode/master and standby.
1.3 Requirements
IItteemm RReeqquuiirreemmeennttss
Browser
Chrome 65 or above
Min. resolution 1920 x 1080
To Next Page
Loading...
