Sungrow EMS300 - Page 25

17
The figure is for reference only. The actual interface may be different and shall
prevail.
PPaarraammeetteerrss
DDeessccrriippttiioonn
FFuunnccttiioonn
CCoommmmiissssiioonniinngg//
CCeeaassiinngg
Commissioning
Carry out active power control according
to the planning curve
Ceasing
—
LLooccaall//RReemmoottee
Local
Set the planning curve locally for control
Remote
Receive the planning curve issued by AGC
for active control
CCoonnttrrooll DDeeaadd
ZZoonnee ((kkWW))
Default value
0.010
Set the value according to actual situation
When setting the llooccaall//rreemmoottee status, it must be consistent with the llooccaall//
rreemmoottee status of the plant lumped parameter, otherwise the policy will not be
executed.
step 3 Click FFiillee IImmppoorrtt to upload the planning file.
Fill in file to be uploaded to the platform according to the template. Otherwise,
file parsing errors may occur and the configuration may fail.
To obtain the template, click TTeemmppllaattee EExxppoorrtt to download the template file in
.csv format to the local PC.
step 4 Click SSaavvee to finish setting the planning curve.
Click FFiillee EExxppoorrtt to download the device running plans.
-- -- EEnndd
User Manual 6 Control Method