2
• Electricity may still exist in the battery when the power supply of the Turnkey
Station is disconnected. Wait 10 minutes to ensure the equipment is completely
voltage-free before any operation.
• All hoisting, transportation, installation, wiring, operation, and maintenance
must be carried out complying with the relevant codes and regulations of the
country where the project is located.
• Always use the product in accordance with the requirements described in this
manual. Otherwise, equipment damage may occur.
To prevent misuse or accidents caused by unrelated personnel, observe the
following precautions:
• Post prominent warning signs around the Turnkey Station to prevent accidents
caused by false switching.
• Place necessary warning signs or barriers near the product.
1.3 Battery Safety
For safe use of the product, the technician should carefully read and strictly observe the
safety requirements. The Company shall not be liable for product functional abnormality,
component damage, personal safety accident, property loss, or other damage caused by
the following reasons:
• The batteries are not charged as required, resulting in capacity loss or irreversible
damage to the batteries.
• A battery is damaged, falls, or leaks due to improper operations or failure to operate the
battery as required.
• The batteries are not powered on in time, which causes damage to the batteries due to
overdischarge.
• The damage is caused to batteries due to the use of improper equipment for charging
and discharging.
• Batteries are frequently overdischarged due to improper maintenance, capacity is
incorrectly expanded, or the batteries have not been fully charged for a long time.
• Battery operation parameters are incorrectly set.
1 Safety Precautions System Manual
To Next Page
Loading...
