21
4
Delivery and Storage
4.1 Identifying PCS
Identify the PCS from its nameplate, which is located on the lower right side of the left side
enclosure of the PCS. The nameplate includes information such as the model, major
technical parameters, marks of certification institutes, origins, and serial number which are
available and recognized by SUNGROW.
Essential technical parameters and other information are contained in the
nameplate.
Protect the nameplate at all times!
4.2 Checking for Transport Damages
The PCS has been strictly inspected and tested before delivery. Despite robust packaging,
the container or inside devices may be damaged during transport. Therefore, once you re-
ceive the PCS, a detailed inspection is necessary.
If any damage is detected, contact the shipping company or Sungrow immediately. A rele-
vant photo is preferred. We will provide you with the fast and best service.
• Examine the contents of the shipment to check if there is anything missing according to
the scope of delivery.
• Check to make sure the PCS and inner devices are the models placed in your order;
• Check thoroughly the PCS and inner devices for any possible damages during transport.
If any damage is detected, contact the forwarding company or Sungrow immediately.
Install and commission the PCS only when it is technically faultless! Make sure be-
fore installing the PCS that
• PCS is intact without any damage;
• All devices inside the PCS are intact without any damages.
To Next Page
Loading...
Need help?
General
