118
B. Assembling the Cassette
ⓐ Assemble the palette cylinder bracket holder bushingⓚ, the screw ⓛ, and the palette cylinder
bracket holder ⓜ. Put together the palette cylinder bracket holder assembled as above and the
palette customized for the user’s working environment using screws.
ⓑ Assemble the X-feed frame ⓐ and the palette cylinder bracket holder ⓑ.
ⓒ Assemble the palette cylinder bracket ⓒ by using the fixing screw ⓔfor the palette cylinder bracket
and the fixing screw washer ⓓ for the palette cylinder bracket.
ⓓ Assemble the palette air cylinder ⓕ using the fixing screw ⓖ for the palette air cylinder.
ⓔ Assemble the palette cylinder shaft ⓙ.
ⓕ Insert the upper-feed air cylinder cable ⑥ as in Fig. 62 into the fitting part ⓗ of the palette air
cylinder ⓕ.
ⓖ Insert the upper-feed air cylinder cable ⑦ as in Fig. 62 into the fitting part ⓘ of the palette air
cylinder ⓕ.
ⓗ When the assembly is completed, adjust the Y-shaft origin following “「15) How to Set the Original
Point of X-Y」of Chapter 10. HOW TO REPAIR THE MACHINE”of the manual.
To Next Page
Loading...
