H. Press ESC key to back to the initial screen.
※ You can confirm the machine backs to the
starting point for sewing directly without dropping
in the origin after finishing sewing.
G.
If you want to back to the previous menu, press
ESC key.
F. If you press ENTER , the changed condition
will be valid and the machine backs to the
previous menu. If you don’t want any change,
press ESC to cancel it.
E.
After pressing ENTER key, change the setting
value or any condition you want by using direction
keys .
004:Strt Ret Mod
1) SHORTEST <-
2) ORG_TO_STR
3) REV_ORG_STR
<Parameter Set>
004.Strt Ret Mod
005.Bobbin Count
006.Prodct Count
<< Main Menu >>
1. Parameter Set
2. Program
3. Bobbin Wind
C. After moving the cursor to “1. Para. Init.”menu
by using direction keys , press ENTER
key. Then you can see the screen like a figure
on the right side. If a parameter initialization is
finished, previous screen appears.
A. Press MODE key.
<< Main Menu >>
0. Initialize
1. Parameter Set
2. Program
<< Initialize >>
1. Para. Init.
2. Sys. UpDate
System Parameter
Initializing....
12) Initialization of Parameter Related to General Sewing
It is used that you want to return sewing to the factroy-installed setting value. Just handle it by
professional A/S engineer as soon as possible.
To Next Page
Loading...
