SunStar SPS/A-3020 5030 SERIES - Setting Extension;Reduction Rate; Using Chain Sewing Mode

51
E. Press ENTER key.
Press ESC key to back to the initial screen.
A. Press X SCALE and set the rate you want. For
example, if you want to reduce 70%, input [0][7][0].
B. Press Y SCALE and set the rate you want. For
example, if you want to reduce 50%, input[0][5]
[0].
<< Main Menu >>
1. Parameter Set
2. Program
3. Bobbin Wind
NO:001 NOR_SEW
XS:070%
YS:100% SP:2000
BC:000 PC:0000
NO:001 NOR_SEW
XS:070%
YS:050% SP:2000
BC:000 PC:0000
(2) Setting the rate for extension/reduction
C. Press NO key and input the pattern number by
using digit keys. (For example, if you want to
work with “001”pattern, input [0][0][1].)
D. Press ENTER key to read patterns and to
be sewing available mode.
NO:001 NOR_SEW
XS:070%
YS:050% SP:2000
BC:000 PC:0000
It is used to work with the various patterns randomly. To use the function, the parameter number related
to general sewing, “054 Number of Chain Sweing.”should be set to the other numbers except “0”. Set the
parameter number related to general sewing, “055 Transferring Chain Number.”to be automatic or manual.
8) Using the Chain Sewing Mode
When you set the
number of
chain sewing as 2
When you set the
number of
chain sewing as 3
Chain No. 000
Pattern No.
001
Chain No. 000
Pattern No.
001
Chain No. 001
Pattern No.
002
Chain No. 002
Pattern No.
003
Chain No. 000
Pattern No.
001
Chain No. 001
Pattern No.
002
Chain No. 000
Pattern No.
001
Chain No. 001
Pattern No.
002
󳥴
󳥴
󳥴
󳥴
󳥴
󳥴
󳥴
󳥴