A. Insert a floppy diskette that you want to make
a copy.
B. Press MODE key.
C. By using direction keys , move to “2.
Program”menu, then press ENTER key.
At this time the upper feed plate descends, and
moves to the starting point
D. After pressing READ key, input the pattern
number you want to make a copy.
(For example, to make a copy “001”, input [0]
[0][1].)
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
014:PTRN READ
NO :001
10) Making a Copy the Pattern to Another Number or Diskette
It is used to make a copy the pattern to another number or diskette. It is available to check, make a
copy or delete the pattern number.
No. 1 Floppy
Diskette
No.001
No. 2 Floppy
Diskette
Copy one pattern to another
pattern number in same diskette.
Copy one pattern to same pattern
number or different one.
No.001
No.002
E. Press ENTER key. The READY LED flickers
during reading the pattern data.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
To Next Page
Loading...
