O. For finishing a pattern generation, press MODE
key. Then, the upper feed plate moves to the
origin and comes to ascend. Press ESC key to
back to the initial screen.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
4) Program Example 3 : Generating the Double Curve Pattern
Input a curving spot that inclines largely among spots that pass on a curve. We give 5 curving lines for
examples here.
(-600,0)
(600,0)
(-300,200)
(300,-200)
(0,0)
A. Insert a floppy disk into a floppy disk drive.
B. Press MODE key.
<< Main Menu >>
2. Program
3. Bobbin Wind
4. Machine Test
M
.
Press TEST key one more time and finish the
test sewing. Then, the upper feed plate comes
to descend and move to origin with the turning
off the READY LED.
N. Press WRITE key and input the number you
want to save by using digit keys, then press
ENTER key. (For example, if you want to
save a pattern number as 301, input [3][0][1].)
During saving the data, READY LED flickers.
If you want to save the pattern with the same
number, just press ENTER key, but if you
want to save it with another number, press
ESC key and save to the other number. After
finishing saving process, the upper feed plate
backs to the origin.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
015:PTRN WRITE
NO :301
To Next Page
Loading...
