D. After pressing JUMP key, move to a random
coordinates (For example X:-0600, Y:00000)
that passes on a circle by using direction keys.
Then, press PNT SET key.
E. If you press EXE key, the machine operates
pattern data, then the feed plate moves according
to the operated data.
F. After pressing CODE key, If you know function
codes related to pattern programming, input
three digit number, but if not, move to “28.
Curve DBL”by using direction keys , after
pressing ENTER key, then press ENTER
key again.
G. Input the stitch width by using the digit keys,
then press ENTER key. (For example, if
you want to set the stitch width as 3mm,
input [0][3][0].) Input the distance between the
two curves by using digit keys, then press
ENTER key. (For example, if you want to
set 5mm, input [0][5][0].) Input a direction
from standard curve by using digit keys, then
press ENTER key. (For example, if you
want to place another curve on above the
standard curve, input [0].)
H. Move to the next coordinates (For example, X:-
0300 Y:00200) by using direction keys, then press
PNT SET key. Same as above, move to the
other three coordinates in turns by using direction
keys and press PNT SET key. At this time,
whenever you press PNT SET key, the number
of screen increases.
I.
If you press EXE key, the machine operates pattern
data, then the feed plate moves according
to the
operated data. At this time, the sewing
machine
discontinues for a while.
JUMP NONE
X:-0600A N:00054
Y:00000A
Function Code?
<Function Code>
028:CURVE DBL <
029:ARC DBL
030:CIRCLE DBL
028:CURVE DBL
WIDTH:030[0.1mm]
OFSET:050[0.1mm]
DIR:0[0/1]
004:JUMP
X:-0600
Y:00000
N:001
028:CURVE DBL
X:00600
Y:00000
N:004
CURVE DBL NONE
X:-0635A N:00157
Y:00035A
Function Code?
C. Move to “2. Program”by using direction keys ,
then press ENTER key. At this time, the
upper feed plate comes to descend and moves to
the origin.
ORIGIN
X:00000A N:00000
Y:00000A
Function Code?
To Next Page
Loading...
