E. If the pattern number is not indicated on one
screen, check it by using direction key .
D. If you press digit key, 1. the pattern number
in a floppy diskette is shown.
C. If you press ENTER key, the screen of the
right sides appears. To check the pattern
number in inner memory, press digit key, 0, and
to check the pattern number in a floppy
diskette, press digit key, 1.
A. Press MODE key.
B. By using direction keys , move to “5.
Pattern List”menu.
<< Main Menu >>
5.Pattern List
6.EMB CALL
Memory(0)/FDD(1)
To Exit(ESC)...
<<Pattern List>>
002 <-
003
004
9) Checking and Deleting the Pattern Number
It is used to check or delete the of pattern number in floppy diskette and inner memory.
<<Pattern List>>
004 <-
005
006
F. After moving the direction key to the pattern
number that you want to delete by using direction
keys , if you press PTN DEL key on the
program unit the screen of the right side
appears. To delete the pattern, press ENTER
key, and to cancel, press ESC key.
G. By pressing ESC key, complete the check of
pattern number. By pressing ESC key again,
back to the initial screen.
Are YOU Sure?
Y(ENTER)/N(ESC)
To Next Page
Loading...
