12
1) Machine Installation Conditions
A. Do not use the machine where the voltage is over regular voltage ±10% to prevent accidents.
B. Check the indicated pressure of the devices that use atmospheric pressure such as the air cylinder to
prevent any accidents from occurring.
C. For safe operation of the machine, use the machine under the following conditions.
Surrounding Temperature During Operation : 0。~40℃(32。~104。F)
Surrounding Temperature During Maintenance : -10。~60℃(14。~140。F)
D. Humidity : Between 45~85%(Relative humidity)
2) Electric Installation Conditions
A. Power voltage
·The power voltage must be between regular voltage ±10%.
·The frequency of the power should be regular frequency (50/60HZ)±1%.
B. Electromagnetic Wave Noise
Use separate power with strong magnetics or high frequency products, and do not leave the machine
near them.
C. Use low voltage when supplements or accessories are being adhered.
D. Be careful not to have water or coffee be spilled into the Controller and Motor.
E. Do not drop the Controller or Motor.
3) Assembly of Peripheral Components
A. Fix belt cover and spool line axis cover to the machine by using fixing screw.
[ Fig. 1 ]
44
MACHINE INSTALLATION
To Next Page
Loading...
