9
SPS/A-3020 SPS/A-5030
X(Left and Right) : 300mm X(Left and Right) : 500mm
Y(Before and After) : 200mm Y(Before and After) : 300mm
2,000 spm (Stitch 3mm Shorter)
0.1 ~ 12.7mm
Transfer by Stepping Pluse Motor
41.2mm
DP×17, DP×5
Average 35mm
Standard 4mm(0.3~7mm)
20mm
Semi Roatation Doubling Hook
Bobbin Case for Semi Rotation Doubling Hook
Bobbin for doubling Hokk
3.5″Floppy Disk(2DD, 2HD) Storing Pattern : Max. 691 Pattern/Disk
The Emergency Stopping Function Can be Used During Operation
The Speed Can be Limited from 180 to 2,000spm by Operating the Switch Outside
Pattern Can be Selected From No. 1 to No. 999
Another Original Point Can be Set by Using the Jog Key
550W Servo Motor
600VA
5。C ~ 40。C
20% ~ 80%
Rated, Voltage ±10%, 50/60Hz
5.0~5.5kgf/㎠(0.49~0.54㎫)
Palette Clamp (cassette type)
Series Type
Sewing Range
Maximum Sewing Speed
Stitch
Feed Plate Transfer Method
Stroke of Needle Bar
Needle Used
Lifting Amount of Feeding Plate
Presser Foot Stroke
Lifting Amount of Presser Foot
Shuttle
Bobbin Case
Bobbin
Storing Device
Emergency Stopping Function
Maximum Speed Limit
Selecting the Pattern
Memory Backup
Main Motor
Consumed Electrical Supply
Proper Temperature for Machine
Voltage
Used Air Pressure
Option
22
MACHINE SPECIFICATIONS
Appropriate Temperature for
Machine Operation
2nd Expedition Function that can Set Location of Needle to Optional
Location by Using Jog Key in Case of Sewing
Setup of Another
Original Point
To Next Page
Loading...
