5
5) Program Example 4 : Pattern Generation by Using the
Second Origin and Pause 41
6) Program Example 5 : Change of Sewing Speed Within a Pattern 45
6-1) Changing the Sewing Speed from an Existing Pattern Data 45
6-2) Changing the Sewing Speed by Making New Pattern Data 48
7) Using the Extension/Reduction Modes 50
8) Using the Chain Sewing Mode 51
9) Checking and Deleting the Pattern Number 54
10) Making a Copy the Pattern to Another Number or Diskette 55
11) Change of Parameter Related to General Sewing 56
12) Initialization of Parameter Related to General Sewing 57
13) System Program Update 58
14) Confirmation for Version of System Program 59
8. Operating Method of High Technology 60
1) Understanding the Function of Machine Test 60
2) It is Able to Convert from Embroidery Design 68
9. Description on Parameter Related to
General Sewing Operation 70
10. How to Repair the Machine 103
1) Adjusting the Height of the Needle Bar 103
2) Adjusting the Needle and the Shuttle 103
3) Adjusting the Spring on the Upper Side of the Shuttle 104
4) Height Adjustment of Feed Plate 104
5) Adjustment of Presser Foot 104
6) Adjustment of Presser Foot Related Parts 106
7) Adjusting Accessories for Thread Delay 106
8) Adjusting Parts for the Wiper 108
9) Adjusting the Thread Trimming Accessories 109
10) Adjusting the Main Thread Control Device 112
11) Adjusting the Upper Thread detecting Device 112
12) Adjusting the Hand Pulley Device 112
13) Adjusting the Winding Device 113
14) Tension Adjustment of Driving Belt 113
15) How to Set the Original Point of X-Y 116
16) Upper/Lower Clamp Disassembly and Cassette Assembly 117
17) Air System Circuit Diagram 119
18) Exchanging the Fuse 120
11. Cause of Break-Down and Troubleshooting 121
Appendix
123
1)
Error List
123
2)
Parameter number related to general sewing
124
3)
Function no. related pattern programming
127
4)
Pattern chart
129
5) Electronic Circult Diagram[SPS/A-5030-HS] 130
To Next Page
Loading...
