EasyManua.ls Logo

Superior xp-950 - Component-Specific Guarantee Provisions; Important Cautions and Voiding Guarantee

Superior xp-950
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
73
Pedals the guarantee applies to material defects. The guarantee cannot be claimed in case of a broken pedal frame, bent
pedal axle or pedal torn from the crank.
Tyres the guarantee is provided for production defects (deformed tyre etc.). The guarantee does not apply to a tyre rubbed
through by the brake pads, tyres worn by riding or braking action.
Wheels the standard guarantee covers material defects (broken rim, hub, cog, axle, spoke – within 30 days) including surface
finish defects.
Brakes, rear derailleur and front derailleur the guarantee covers material defects. The guarantee does not apply to
adjustments. Setting changes partially due to storage, handling and riding
and tuning belongs to standard maintenance.
Saddle, seatpost material defects are accepted, they are considered from the viewpoint of fulfilling its function. Grooves
resulting from the seatpost moving in the saddle tube cannot be claimed.
Chain a material defect or breakage is a subject of the guarantee. The guarantee does not apply to standard wear and tear or
reduction of function as a result of neglecting maintenance.
Reflectors broken reflectors are not a subject of the guarantee.
Completely spring-loaded frame the guarantee applies to material, welds and individual movable components.
In principle, it cannot be claimed in case of damage caused by:
accident
sport competition activity
overloading in extreme conditions (difficult downhill ride,
riding in water and snow)
exposure to weather effects (rain, sunshine, storage in a wet environment)
unprofessional repair
by two persons riding on one bicycle
violent damage
jumps when riding
insufficient maintenance
The guarantee does not apply to the movable parts of a mechanism if these components were not tightened properly and the bike
was used in spite of this fact. These components become worn by usage and for that reason, regular maintenance is necessary.
Caution: If you do not have experience in the repair of completely spring-loaded frames, leave service to a qualified mechanic.
Each fall may result in a risk to your life or health or cause damage to your bike or to third parties. This warning should never be
forgotten when riding a bicycle.
IMPORTANT CAUTION
Claims do not apply to standard maintenance of the bike:
1. Loosened cranks on the central axle (insufficiently tightened central bolt)
2. Backlash in the quill assembly (insufficiently tightened locking nuts of the quill assembly)
3. Incorrect operation of the brakes (resulting from the use and consequent wear of the brake shoes, stretching of the brake cables)
4. Chain slipping down (resulting from incorrect gear changing and consequent chain crossing and slipping or dragging against
other cogs)
5. Incorrect rear or front derailleur operation (tearing out of the control cables and consequent insufficient maintenance)
6. Backlash in the front and rear hubs (insufficiently tightened cones in the hubs)
ENGLISH

Table of Contents