To Next PageTo Next PageWhat to do if my SuperMax TV Receiver says 'No TV program'?
If your SuperMax TV Receiver displays 'NO TV program' but is on, try switching to a different channel. If that doesn't work, ensure you have the correct subscription or service for the channel, as it might be scrambled.
Why is there no picture on my SuperMax TV Receiver?
If your SuperMax TV Receiver shows no picture, first ensure the receiver is not in standby mode by turning it on. Check that the RCA jack is firmly connected to the video output port of your TV. Also, verify that you've selected the correct channel or video output on your TV. Finally, adjust the brightness level on your TV.
General| Brand | SuperMax |
|---|---|
| Model | TV |
| Category | TV Receiver |
| Language | English |
Connect external audio systems using RCA cables for audio input.
Connect satellite dishes using coaxial cables to LNB IN or DiSEqC motors.
How to power on the Set-Top Box (STB) and its initial channel display.
Instructions for entering and exiting standby mode using the power button.
How to change channels using the up/down buttons in full screen.
Adjusting the audio volume level using the volume +/- buttons.
Using numeric keys on the remote to select channels or enter parameters.
Function to mute and unmute the audio output of the receiver.
Pausing the current video playback and resuming it.
Switching directly to the previously watched channel.
Accessing and managing favorite channel groups.
Magnifying a specific area of the displayed image.
Selecting different audio tracks or modes for the current channel.
Displaying current channel status and program information.
Accessing the Electronic Program Guide for channel listings and schedules.
Switching between TV and Radio modes.
Accessing and viewing the list of available channels.
Selecting and switching between different satellite sources.
Accessing and viewing teletext information for channels.
Displaying multiple channel preview windows simultaneously.
Functionality for recording programs, typically requires a USB device.
Pausing live TV and resuming playback later.
Displaying a secondary picture-in-picture window.
Organizing and managing TV channels, including editing and sorting.
Viewing and managing the list of available radio channels.
Main installation menu for setting up the receiver.
Configuring satellite settings for signal reception.
Selecting the appropriate LNB type for satellite dish connection.
Configuring DiSEqC settings for multiple LNBs or switches.
Setting up a motorized satellite dish positioner.
Configuring the 22kHz tone switch for LNB control.
Managing the 0/12V voltage output for LNB control.
Enabling or disabling the Toneburst function for LNBs.
Setting the signal polarity (Horizontal/Vertical) for reception.
Scanning for new transponders (TPs) and channels.
Performing a single channel scan for a specific transponder.
Searching for channels across multiple satellites.
Automatically detecting and configuring DiSEqC settings.
Performing an automatic scan for all available channels.
Setting menu and audio/subtitle languages for the receiver.
Configuring video output, aspect ratio, and RF settings.
Adjusting the receiver's date, time, and GMT offset.
Setting timers for channel changes, wake-up, sleep, or reminders.
Configuring which channel the receiver starts on.
Selecting how to play channels (Free, Scrambled, All).
Customizing On-Screen Display settings like transparency and timeout.
Setting passwords for menu access and channel locking.
Displaying system hardware and software information.
Assisting with antenna alignment using satellite data.
Resetting receiver parameters to factory default settings.
Updating the receiver's firmware via RS232.
Updating the receiver's firmware using a USB drive.
Creating a backup of the receiver's software and settings to USB.
Playing the classic Tetris game on the receiver.
Playing the classic Snake game on the receiver.
Playing the strategy game Othello on the receiver.
Managing recorded files, including lock, delete, and rename functions.
Checking details of the connected USB storage device.
Formatting the connected USB storage device.
Configuring settings related to Personal Video Recorder (PVR) functions.
Browsing and managing files on the USB storage.
Testing the read/write speed of the USB device.
Safely ejecting the USB device from the receiver.
