Supermicro X10DRT-B+ - Cpu Configuration

4-6
X10DRT-B+ Motherboard User’s Manual

CPU Conguration
This submenu displays the following information regarding the CPU installed in
Socket 1 and (or) Socket 2 as detected by the BIOS.
• Processor Socket
• Processor ID
• Processor Frequency
• Processor Maximum Ratio
• Processor Minimum Ratio
• Microcode Revision
• L1 Cache RAM
• L2 Cache RAM
• L3 Cache RAM
• CPU 1 Version
• CPU 2 Version
Clock Spread Spectrum
Select Enabled to enable Clock Spectrum support, which will allow the BIOS to at-
tempt to reduce the level of Electromagnetic Interference caused by the components
whenever needed. The options are Disabled and Enabled.
Hyper-Threading (ALL)
Select Enable to support Intel Hyper-threading Technology to enhance CPU perfor-
mance. The options are Enable and Disable.
Cores Enabled
Set a numeric value to enable the number of cores in the CPU. (Please refer to
Intel's website for more information.) Enter 0 to enable all cores.
Monitor/Mwait
Select Enable to use the CPU monitor instructions for address-range monitoring
and advanced power management to enhance processor performance. The options
are Enable and Disable.