Supero C2G41 - Page 69

Chapter 4: AMI BIOS
4-9
PEG - PCI-E Graphics adapter (optional add-on card)
PCI - PCI graphics adapter (optional add-on card)
IGD - Internal Graphics Display (built-in)
IGD Graphics Mode Select
Use the feature to set the amount of system memory to be used by the Internal
Graphics Devices. The options are Disabled, Enabled 32 MB, Enabled 64 MB,
and Enabled 128 MB.
IGD GTT Graphics Memory Size
This feature allows the user to select the IGD GTT Graphics Size. The Default
setting is No VT Mode, 2 MB.
PEGPortConguration
PEGPort(PCI-E Graphics Port)
Use the feature to congure the PEG Port. The Default setting is Auto to
allow the PEG Port to be automatically detected and congured by the
BIOS.
VideoFunctionConguration
DVMT Mode Select
Select DVMT Mode to enable Dynamic Video Memory Technology (DVMT) mode,
which dynamically allocates video memory for optimal efciency on 2D/3D video
applications. The options are Fixed Mode and DVMT Mode.
DVMT/Fixed Memory
This option allows the user to set the amount of memory to be used for
the operation of DVMT/Fixed Mode. The options are 128 MB, 256 MB and
Maximum DVMT.
Spread Spectrum Clock
If Enabled, the BIOS will monitor the level of Electromagnetic Interference
caused by the components and will attempt to decrease the interference when-
ever needed. The options are Enabled and Disabled.
Frontside Audio Mode
This feature lets you choose the audio mode for the front-side audio connectors of
the motherboard. Select HD Audio for High Denition Audio or AC'97 for legacy
audio. The options are HD Audio and AC'97.