Improper tire pressure is a common reason
that causes tire failure, and may cause
severe tire ruptures, tread separation and
loss control of the electric motorcycle, which
may result in serious personal injury. Check
the tires regularly to ensure proper tire
condition.
WARNING
Starting and Operating Starting and Operating
7.1
7. 2
Before operating the Light Bee electric motorcycle,
please check the following items to ensure that
the motorcycle is in operational condition:
Steering
Check if the handlebar, ahead stem and headset
need to be tightened. Adjust if necessary. Please
refer to "Torque Management" on page 10.3.
Battery Pack
Check that the battery level displayed on the
battery pack is sufficient to support your riding.
The range varies according to actual use of differ-
ent environment, so the displayed battery level is
for reference only.
Chain
Check the chain tension and condition. Adjust or
replace if necessary. Please refer to "Chain" on
page 10.12.
Brake System
Pull the brake lever and push the motorcycle to
see if the front and rear wheels can be fully
locked. You should be able to lock the wheels
completely by braking.
Throttle
When the key switch is in the off position, twist the
throttle and release it to check whether the
throttle rotates smoothly and returns to idle freely.
Tire
Check the tire pressure and tread depth of the
tires.
Check the cold tire pressure, maintain the correct
tire pressure. Check for damage and abnormal
wear of the tire. As described on page 10.11, when
the tread depth reached the warning mark on the
tire, please replace replace the tire immediately.
Pre-ride Check
To Next Page
Loading...
