Sutron Corporation Satlink Operations & Maintenance Manual, Rev 8.04.2 11/3/2016 pg. 114
10.6.7. Radio Diags
This button is used for Iridium and Cell telemetry setups. Pressing it will bring up a Diagnostics
window that shows the current status of the Iridium or Cell modem, along with signal strength
information. The information will automatically upgrade and graph the signal strength over time.
Besides signal strength, information provided includes the time when the modem last connected
to the network, contents of the last received message, phone number, IP address, and IMEI.
For Iridium modems, the Diagnostics window brings up the Message Check option. Pressing this
button causes Satlink to immediately contact the Iridium gateway or the Cellphone network and
ask for new incoming messages. The most recently received message since power on will be
shown in the Diagnostics window.
For cell modems, the Diagnostics window offers the Send SMS option. It may be used to send a
text message to any cell number provided. The text message will contain the station name and
current time.
To Next Page
Loading...