ENGINE 3-63
• When installing the intake pipe bolts, apply a small quantity of
THREAD LOCK “1342” to these thread.
**
**
*99000-32050: THREAD LOCK “1342”
!
Use a new O-ring to prevent the joint from sucking in
any air.
NOTE:
* When replacing the intake pipes, identify the different intake
pipes according to each I.D. code
1
(1-26E0 for cylinder #1)
(1-26E0 for cylinder #2)
(3-26E0 for cylinder #3)
(3-26E0 for cylinder #4)
* Make sure that the “UP” mark faces up.
To Next Page
Loading...
