Suzuki GSF600SK2 2002 - Page 307

SERVICING INFORMATION 7-39
CARBURETOR
ITEM
SPECIFICATION
E-02, 19 E-03, 28
Carburetor type KEIHIN CVR32SS ←
Bore size 32 mm ←
I.D. No. 31F0 31F2
Idle r/min. 1 200 ± 100 r/min. ←
Float height 17.0 ± 1.0 mm
(0.67 ± 0.04 in)
←
Main jet (M.J.) #92 ←
Jet needle (J.N.) N1QL ←
Needle jet (N.J.)
φ 3.4 ←
Throttle valve (Th.V) 11° ←
Pilot jet (P.J.) #35 ←
Pilot screw (P.S.) PRE-SET PRE-SET
(1¾ turns back) (1
7
/
8
turns back)
Throttle cable play 2.0 – 4.0 mm
(pulling cable) (0.08 – 0.16 in)
←
Starter (enricher) plunger cable 0.5 – 1.0 mm
play (0.02 – 0.04 in)
←
CARBURETOR
ITEM
SPECIFICATION
E-19 (U-type) E-33
Carburetor type KEIHIN CVR32SS ←
Bore size 32 mm ←
I.D. No. 31F1 31F3
Idle r/min. 1 200 ± 100 r/min. ←
Float height 17.0 ± 1.0 mm
(0.67 ± 0.04 in)
←
Main jet (M.J.) #92 ←
Jet needle (J.N.) N1QL ←
Needle jet (N.J.)
φ 3.4 ←
Throttle valve (Th.V) 11° ←
Pilot jet (P.J.) #35 ←
Pilot screw (P.S.) PRE-SET
(1
7
/
8
turns back)
←
Throttle cable play 2.0 – 4.0 mm
(pulling cable) (0.08 – 0.16 in)
←
Starter (enricher) plunger cable 0.5 – 1.0 mm
play (0.02 – 0.04 in)
←