3-46 ENGINE
• Pour about 50 ml of engine oil into each oil pocket in the cylin-
der head.
NOTE:
Turn the crankshaft and check that all the moving parts (e.g.,
cam follower, camshaft) work properly.
$
Be sure to check and adjust the valve clearance. (!2-
4)
• Apply a light coat of the recommended bond to the signal gen-
erator gasket mating surface A as shown.
* 99000-31140: SUZUKI BOND “1207B”
• Install a new gasket and the signal generator cover 1.
NOTE:
* Install the gasket washer onto the signal generator cover bolt
B
as shown.
* Apply a small quantity of THREAD LOCK “1342” to the signal
generator cover bolts.
#99000-32050: THREAD LOCK “1342”
$
Use a new gasket to prevent oil leakage.
To Next Page
Loading...
