3-52 ENGINE
CYLINDER HEAD DISASSEMBLY
• Remove the rocker arm shaft set bolt 1 and cylinder head plug
2.
" 09900-00410: Hexagon wrench set
• Remove the rocker arm shaft 1, rocker arm 2 and spring 3.
NOTE:
To remove the rocker arm shaft, screw a 8-mm bolt into the rocker
arm shaft end and then pull out the shaft.
• Using the special tools, compress the valve spring and remove
the valve cotters 4 from the valve stem.
" 09916-14510: Valve lifter
09916-14910: Valve lifter attachment
09916-84511: Tweezers
• Remove the valve spring retainer 5 and the inner and outer
valve springs 6.
To Next Page
Loading...
